We went to Roslyn New-York and re key our customer door lock.
Rekeying Locks for Premises
Sometimes one has to inevitably fire some of his employees. When this happens, it becomes
necessary to have all the locks to the premises changed. Alternatively, one may be forced to
rekey his locks. As an employer, you have an option of rekeying all the locks or you may choose
to rekey the front and the back door only. One of our clients in Roslyn New York called us
and informed us that some of the locks to her commercial building had stopped working. More
importantly, she had to either change the locks or rekey them after firing some of her staff.
We dispatched Meir who is one of the most experienced locksmith from FrogLock to go and
do the job for our client. After studying the locks, Meir chose to have the locks rekeyed so that
no stranger could have access to our client’s premises without his permission. Luckily, he had
walked with a rekeying kit which he used to rekey the locks
Meir commenced his work by removing the exterior door knob using a special wire which he
inserted in to the knob and bent it. He took out the cylinder and pushed it to remove the sleeve
covering it. He used a wrench to remove the remaining ring from the cylinder. He proceeded
to removing the cylinder plug. This had to be carefully done so as to ensure that the springs do
not fall out. He proceeded by removing the lower lock pins and inserted the new lock key. This
pushed the springs out of the way and helped when inserting the new locks. He inserted and
removed the pins several times until he achieved the desired results. He reassembled the lock and
replaced the cylinder. He tested the rekeyed door to ensure that it was working.
Watch Frog-lock in action:
Below is Meir form FrogLock rekeying the lock.